Buy DAP-3310 PoE Outdoor Access Point with PoE Pass through from Hubtechshop, Nairobi Kenya
In wireless distribution system (WDS) mode the DAP-3310 PoE Outdoor Access Point can expand current wireless coverage without the need for a wired backbone link. As a wireless client it can connect to an existing AP and expand the network physically with the two built-in 10/100 Ethernet ports. Repeater mode will extend current wireless coverage eliminating dead spots and weak signals. WISP mode functionality includes the ability to function as a client or repeater. The DAP-3310 supports up to 8 SSIDs, allowing the administrators to logically divide the access point into several virtual access points all within a single hardware platform. Rather than having separate networks with several access points, administrators can deploy one single AP to support more than one application, such as public Internet access and internal network control to increase flexibility and keep costs down. The Dlink DAP-3310 supports 802.1Q VLAN Tagging, operating with multiple SSIDs to segment traffic to enhance performance and security. The DAP-3310 provides WLAN partitioning, a useful function for deployments such as wireless hot spots. With station-to-station partitioning enabled, security is enhanced, as wireless users cannot see each other, and the possibility for data theft is greatly reduced.
Type | Software Managed AP |
|---|---|
Wireless standard | Wireless N |
Frequency band mode | Single-band |
Antenna type | Embedded sector antenna |
Antenna gain | 10 dBi for 2.4 GHz |
Power-over-Ethernet | Yes |
Wired interface | 2 x Fast Ethernet LAN |
Indoor/outdoor | Outdoor |
Type of housing | Plastic |
IP rating | IPX6 |
Wireless modes | Access Point (AP) WDS bridge WDS with AP Wireless client |
Advanced features | MIMO |
Maximum number of SSIDs | 8 |
Auto channel selection | |
WMM-PS/802.11e (U-APSD) | |
Wi-Fi scheduler | |
WEP 64/128 bit | |
WPA/WPA2-Personal/Enterprise | |
TKIP/AES encryption | |
WPA_WPA2_PSK over WDS | |
SSID broadcast disable | |
Station isolation | |
MAC address filtering | |
802.1X authentication | |
WEB | |
SNMP (v1, v2c, v3) | |
Telnet | |
SSH |
Box Contains
1 x D-Link Wireless N DAP-3310 PoE Outdoor Access Point with PoE Pass-Through
Also see,
DGS-1016D/G2 D-LINK DGS-1016D 16-port UTP 10/100/1000Mbps Auto-sensing
D-Link DWL-3200AP Wireless Access Point
D-Link DAP-2360 Wireless N PoE Access Point
The D-Link DAP-3410 5 GHz Outdoor Wireless PoE Range Extender
D-Link WL150 MB 3G 4 Port, DWR-512_E
Dlink DGS-1024D 24-port 10/100/1000Base-T Unmanaged Green Desktop Gigabit Switch
The D-Link DGS-1100-08P 8 Port Gigabit PoE Smart Switch
DES-1100-26 D-LINK DES-1100-26 EasySmart switch 24 ports 10/100Mbps
DLink DGS-1210 16 port Gigabit Switch Managed
D-LINK Transceiver 10/100Base TX / 100Base FX SC 30km DMC-530SC




Esther1 Mugethi –
The DAP-3310 provides WLAN partitioning, a useful function for deployments such as wireless hot spots.
Winfred Kathure –
its performance is the best.
Eunice Waweru –
This outdoor access point delivers reliable dual-band wireless connectivity with the added convenience of PoE pass-through, allowing a single cable to power both the AP and another device.